1⁄35Creating Realistic Metal Finishes
In order to reach the Holy Grail of modelling techniques, one has to find the right way to do things (as I see it). I tried this technique out when building 1/48 model aircraft engines and it seems to work really well.
1. Paint the "metal" part in the usual Gun-metal or matt black finish by airbrush if possible (but not necessary). Allow to dry completely.
2. Take a 2B or soft graphite artist pencil and scrape the point until you have a suitable "mound" of graphite in the tray/pallette.
3. Take a flat brush and collect a sizeable amount onto the brush, discarding the excess by tapping on a hard surface and "brush" the pre-painted and dried part with the brush. You will see that a "metal" (graphite) finish has been sucessfully reproduced.
4. If you want a "shinier" part, then use the pencil to create "scratches" on the item.
5. Be careful not to touch the part or you will remove the graphite. Worse still, you'll leave fingerprints.
Note: If you can get hold of some, then Fingerprint powder (aluminium powder) should be available from your local fiendly police station for free. Mine was so helpful, I have enough to finish a lifetime's work.
Easy! Cool eh? Happy modelling.
Martin Wilson U.K.
Copyright ©2002 - Text by Martin Wilson. All Rights Reserved.
Have you tried this Technique? Or do you have questions
about it? Talk about them in the
Copyright ©2017 by Martin Wilson. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of KitMaker Network, KitMaker Network, or Silver Star Enterrpises. All rights reserved.