login   |    register
Model Monkey [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
1350
Mk.28 Dual Turret Mounts
5
  • move

by: Rory Snell [ MCRUNTY ]


Originally published on:
Model Shipwrights

Introduction

Model Monkey 3D printing is a company that specialized in high quality 3D printed parts of various scales. Model Monkey does have a presence on Shapeways however they appear to be moving more and more of their products in-house and using their own much higher quality 3D printers using a fine grey resin. After purchasing a set of 1/350 scale 5"/38 Mk.28 Mounts from Shapeways I was contacted by the owner, Stephen Larsen, and offered a set of mounts printed using their in-house printers.

Contents

10 x 5"/38 Mk.28 Dual Turret Mounts with fixed trunnions.

Review

The mounts arrived bubble-wrapped in a sturdy box. There were 10 turret mounts mounted to a single resin sprue. All mounts were still attached. I was not able to find any flaws in the mounts. The detail on the mounts is superb with the tiniest of bolts being present. Hatches and vision ports are well defined and appear to be in scale. There are no ladders molded onto the turrets so you will need to add your own with PE/Brass wire.

Locator holes for after-market barrels were all present and clear of obstruction. The turned brass barrels I had on hand fit into the holes perfectly with no additional drilling required.

There are still striations on the mounts caused by the printing process however they are almost negligible, especially in comparison to offerings from Shapeways. I did notice some very small burrs on the surface but a single pass of the sanding stick removed these.

For the purposes of this review I removed one of the turrets and gave it a basecoat of Vallejo Grey surface primer to highlight the detail. I then applied a quick wash of Citadel Nuln oil which really made the detail pop. I also found the addition of paint further reduced the appearance of the printing striations.

Conclusion

I have not had the chance to try any of the traditional resin alternatives for these turrets but I am highly impressed with these turrets. They look great and looking at the cost of the traditional resin turrets, are very affordable. I was so impressed I have also purchased several sets of Fire Control Directors from Model Monkeys web-store.

SUMMARY
Highs: Great detail present. Cost effective alternative.
Lows: Minor striations present from the printing process. No ladders molded.
Verdict: See text above
Percentage Rating
90%
  Scale: 1:350
  Mfg. ID: 350-Mk28fixed10
  Related Link: 
  PUBLISHED: Nov 04, 2019
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.00%
  MAKER/PUBLISHER: 90.00%

Our Thanks to Model Monkey!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Rory Snell (McRunty)
FROM: MISSOURI, UNITED STATES

Primary interest is 1/35 scale Armour, 1/350 ships, a smattering of 1/48 aircraft and anything else that takes my interest i.e sci-fi kits etc. I have no real preference in subject or nation, just what takes my interest.

Copyright 2019 text by Rory Snell [ MCRUNTY ]. All rights reserved.



Comments

I purchased a set of these for my North Carolina build and found them superior over the kit supplied turrets. Glad to hear a second opinion on these. Mark
NOV 05, 2019 - 12:31 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move