login   |    register
172
Thursday, December 21, 2017 - 02:17 AM UTC
Special Hobby have announced a bundle of new detail sets for their 1:72 P-40 kits as part of their CMK range of resin upgrades.
Q72297 - 1/72 P-40 Wheels – Cross Tread
The set contains all new wheels with cross tread tyres, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros

Q72298 - 1/72 P-40 Wheels – Diamond and Hole Tread
The set contains all new wheels with diamond and hole style tread, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros

Q72300 - 1/72 P-40N-5 through N-40 Seat with Belts
For the new Special Hobby P-40N kits (later blocks), but not just for these kits, has been designed this set which brings the modeller a new cast pilot’s seat with belts. 3D designed, the seat master pattern was produced using a 3D printer.
Price: 3.70 Euros

Q72301 - 1/72 P-40 Cockpit Sidewalls and Control Column
The new Special Hobby P-40 Warhawk kits will benefit from the addition of this set which offers the modeller new and nicely detailed cockpit sidewalls and a new control stick. The cast part replace directly and easily the original styrene items. Not much surgery needed. The master parts were 3D designed and printed.
Price: 5.70 Euros

Q72303 - 1/72 Kittyhawk IV Seat with Sutton Harness
The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot’s seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the master parts produced on a 3D printer.
Price: 3.70 Euros

Q72293 - 1/72 P-40E, F, K, L, M and N-1 Seat
This new resin cast seat has been tailored to fit the new Special Hobby P-40 kits in the E, K, M and N-1 version and can be used with earlier Special Hobby P-40F and L versions too as well as with other P-40 kits. 3D designed, master parts 3D printed. The seat is plain, with no belts.
Price: 2.70 Euros


Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
Only 1 reader has rated this.

Comments

We broke our quick reply box. Working on it. Until fixed go to topic to reply.
Thanks.
THIS STORY HAS BEEN READ 1,061 TIMES.

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
CMK ReviewsMORE
SE.5a – Correction Wheels First Look
by Rowan Baylis
Junkers Ju-88 Wheels First Look
by Rowan Baylis
Hurricane Mk. I Upgrades In-Box Review
by Rowan Baylis
Hawker Tempest Resin Upgrades First Look
by Rowan Baylis
Pz.Kpfw. IV Schmalturm In-Box Review
by Andras
Sd.Kfz.251/20 UHU Conversion In-Box Review
by Andras
Sd.Kfz.251/21 “Drilling” In-Box Review
by Andras
British QF 4 inch HA Cannon In-Box Review
by Alan McNeilly
US Naval 4 inch/50 cal Gun Built Review
by Alan McNeilly
Crusader Engine Set First Look
by Ted Hayward | of 3 ratings, 100% found this helpful
British Officer from India etc In-Box Review
by Bill Cross | of 4 ratings, 100% found this helpful
German Anti-Tank Mines In-Box Review
by Bill Cross | of 1 ratings, 100% found this helpful
King Tiger Engine Set In-Box Review
by Charles Reading | of 2 ratings, 100% found this helpful
Wehtmacht tank hunter marching In-Box Review
by Bill Cross | of 4 ratings, 100% found this helpful
Hetzer Exhaust (Early/Mid) In-Box Review
by Bill Cross | of 4 ratings, 100% found this helpful
Submit your own product review!